The methods for repairing tires in different repair shops are different. Some internal supplements and some external supplements. So, what's the difference between the different methods? It is understood that tires are now being punctured by foreign objects, and in particular, the phenomenon of iron pinning is common. Since there are not many places where tires can be repaired, once the tires are punctured and leaked, most owners can only change their tires first, and then find a small repair shop on the roadside to repair them. Due to the low cost of repairing the tires, most of the ordinary tire repair shops only provide simple external supplements, and glue sticks are used to glue the strong glue into the holes to complete the repairs. The cost for a one-time repair is about 10 yuan. Experts say that this method of patching small holes in tires is only used during temporary relief and is a method that has gradually been eliminated. Because the external material is often different from the strength of the original tire, repair will lead to inconsistent force of the tire, the tire frame is easily deformed, and the degree of external seal is not high, air and water can easily enter the tire, resulting in the internal steel The line is rusted and there are potential safety hazards when driving at high speeds. Some tires are only scrapped after only three or four months. Therefore, it is recommended that the owner of the tire repaired external to find a professional repair shop to make up for it. In contrast, the method of filling the tires is much more complex, and it requires a professional tool for dismantling the tires. The tires are disassembled from the hubs, and after the holes are found, they are heated after being heated by a dedicated vulcanizing machine. . Using this method can also make up a larger wound. However, such hot supplements are more expensive, such as small holes ranging from 15 yuan to 20 yuan, and larger wounds cost about 50 yuan. But the benefits are obvious and safe to use.
Mingtai X-ray Film View Lamp application areas: hospital wards, operating rooms, emergency centers, medical centers, dental clinics and other medical units
Each can be independent light and independent dimming, when overall light, there is no shadow between each. With film sensor that plug in the light on, pull off the film off
Built-in power, turn off the switch that disconnect the entire device power
view screen center brightness> 4500cd / ㎡
X-Ray Film View Lamp,Film View Lamp,Radiology X Ray Equipment,Digital X Ray Machine Shandong Mingtai Medical Equipment Group Co., Ltd , https://www.mingtaic.com
