How to use industrial vacuum cleaners safely, what should you pay attention to when using industrial vacuum cleaners? The following will be explained in detail by Shanghai Bayu technical staff:
1. Before use , first connect the hose to the suction port of the casing , and tighten the hose with the extra long pipe and the nozzle at the end of the pipe , such as furniture brush, slot nozzle, floor brush, etc. Crevice nozzle inlet by less noise when using a high continuous use time should not be too long. 2. Industrial vacuum cleaners should be used at an altitude of not more than 1000 meters , well ventilated , ambient temperature not exceeding 40 °C , no flammable, corrosive gas in the air, dry room or the like.
3. Industrial vacuum cleaner motors are mostly high-speed motors . Brushes are prone to wear after long-term operation . Domestic vacuum cleaners should be replaced with brushes for one to one and a half years.
4. Connect the ground wire to ensure safe use of electricity. Household vacuum cleaners each successive time not more than 1 hour, each industrial vacuum cleaners do not exceed 8 hours of continuous use, to prevent the motor overheating and burning, and one kind of Qingdao-million industrial vacuum cleaners, which thanks to a special cooling system Di, can It runs continuously for 36 hours and can be used with machine tools.
5. When using the vacuum cleaner with automatic winding device , pull the power cable out enough length . Do not pull the power cable over the head . If you see the yellow or red mark on the power cable , stop pulling. Out. When you need to rewind the power cord , you can automatically retract it when you press the button.
Industrial vacuum cleaner
6. Usually use should be careful not to make the vacuum cleaner wet , wet hands can not operate the machine. If there are large pieces of paper, paper balls, plastic cloth or something larger than the diameter of the suction pipe , it should be excluded in advance , otherwise it will easily block the suction pipe.
7. When using a liquid absorbing material for industrial vacuum cleaner, the filter should be removed, in order to extend its service life.
8. When using , depending on the circumstances of cleaning , the suction control device can be adjusted appropriately. There is a circular hole in the elbow, above a adjustment ring when the adjustment ring aperture cover on the elbow, the maximum suction, and when the adjustment ring is exposed all the pores, the suction was minimal. Some vacuum cleaners use motor speed regulation to adjust the suction.
9. When they find more dust storage barrel trash, garbage should be removed while the dust on the filter, to maintain good ventilation duct to prevent clogging of the filter caused by suction does not drop, motor heat and reduce the use of cleaner life.
10. The vacuum cleaner after use for some time, since the excessive accumulation of dust in the filter belt, suction will cause decreased. In this case the ash pan can swing on the frame of the vacuum cleaner, so that the suction recovery. If the shaking of the ash frame still does not restore the suction , it means that the dust in the barrel is full and should be removed in time.
12. After the vacuum cleaner is used , it should be stored in a dry place . If it is placed in an excessively humid place, it will affect the electrical insulation and service life.
Through the above introduction, I believe that you have already learned about the safe use of industrial vacuum cleaners. If you have any other questions, please feel free to contact us! Shanghai Bashu is a professional supplier of industrial vacuum cleaners. It has been selling industrial vacuum cleaners for many years. It can provide you with industrial vacuum cleaners of various brands and models. The price is cheaper. Welcome to buy, free consultation hotline: 400-618 -0588
To view our special industrial vacuum cleaner products, please visit: http://

Vaccine For Rabies Prophylaxis

Travelers to areas where rabies is endemic may be at risk, especially if they are likely to come in contact with animals in areas where dog or other animal rabies is enzootic and immediate access to appropriate medical care is unlikely. Canine rabies remains highly endemic in certain areas of the world. Need for rabies preexposure vaccination depends on the nature of risk and associated level of potential exposure. preexposure vaccination based on local incidence of rabies in the country to be visited, availability of appropriate agents for rabies postexposure prophylaxis in that country, and intended activity and duration of stay

Vaccine For Rabies Prophylaxis,Rabies Prophylaxis Vaccine,Freeze Rabies Prophylaxis Vaccine,Freeze Vaccine For Rabies Prophylaxis

Changchun Zhuoyi Biological Co., Ltd , https://www.zhuoyi-bio.com